ABOUT

This project is to build an electrical generator that is based on the technology of Nikola Tesla.  The generator is more efficient than other generators that exist today and can be used in combination with solar or wind power to allow for off grid living. The generator design will be open sourced to allow for others to replicate the design for their own use. Also, the intent is to allow that these devices to be built and distributed through local communities through independent small business start-ups.

HISTORY

This project consists of two devices called a Quantum Energy Generator (QEG) and a miniature version of a QEG. The larger QEG has the potential to supply power on a larger scale, such as providing lighting for a small village.  The mini QEG has the potential to supply power on a smaller scale, such as providing power for appliances in off grid situations. This project has been in development for 4 years and both prototypes have already been built. Recently new information has been provided that will allow for the completion of both prototypes.  This campaign is intended to raise the funds necessary to complete both devices.

THE PLAN

A new circuit necessary to complete the project needs to be built and tested. This testing will be done on the mini QEG. The reason for this is that the mini-QEG has been designed to allow for faster and cheaper experimentation for testing and tuning the circuit. Should any mistakes occur on the mini QEG during this testing, they will be much easier to correct until the right set up is discovered for the circuit. Once this is done, then the solution can be upscaled and applied to the large QEG. The large QEG open sourced materials will be updated with the solution. A build manual and CAD package will be written and offered for the mini-QEG after testing. This information will be open sourced to allow for anyone to build their own.

To implement this plan, we are raising money to build a new circuit, and to transport the mini-QEG which has been sitting in storage in China to our lab in Morocco. Once the campaign is funded, the project should take a few months to complete.  Please see projected project timeline below.

PROJECT TIMELINE
2/10/2018 Beginning of kickstart funding campaign
2/24/2018  End of kickstart funding campaign
2/24/2018- 2/28/2018  Invoice / charge cards to collect pledges (or sooner if project is funded sooner)
3/01/2018- 4/01/2018  Ordering parts and transporting mini QEG
4/01/2018- 4/15/2018  testing mini QEG and reporting results
4/15/2018-5/1/2018  writing the build manual for mini-QEG and updated circuit information for big QEG

ABOUT THE CIRCUIT

The new information regarding the circuit that needs to be designed, built and tested has been analyzed and explained technically in a full presentation. This presentation is available to anyone for a donation of $10 and can be purchased for instant download at this link. It is called “QEG BlackBox Analysis Archive Package”. The footage shows a working QEG model that is self looping and explains the circuit needed to achieve this.

ABOUT THE RESEARCH AND DEVELOPMENT

Research and development for these projects has been ongoing with many various teams around the world since 2014. All related testing and analysis information for this project has been preserved in an online platform called the Clean Energy Academy. Here you will find past archives of project videos, classes, reports and schematics for the project. The Academy also hosts live calls for various presentations, key note speakers and live Q&A. These calls are included with Academy memberships but are also open to non-members who wish to attend via a one time donation. These calls are held twice a month via zoom and the archives are available to purchase.

QEG TECHNICAL SYSTEM DESCRIPTION

The Quantum Energy Generator system (QEG) is an adaptation of one of Nikola Tesla’s many patented electrical generator / dynamo / alternator designs. The particular patent referenced is No. 511,916, titled simply “Electric Generator”, and dated January 2, 1894. The adaptation is a conversion from a linear generating system with a reciprocating rod whose period is electrically regulated, to a rotary generating system.

The QEG prototype is scaled to produce electrical power in the range of 10‐15 kW (kilowatts) continuously, and can be set up to provide either 120 Volt or 230‐240 Volt, 50‐60Hz single phase AC output.

Service life of the device is limited only by certain replaceable components, such as bearings, v‐belts, and capacitors. The basic machine should operate trouble‐free (with minimal maintenance) for as long as any good quality electro‐mechanical appliance, such as a quality washing machine or refrigerator. Heavy‐duty mechanical components are used throughout for reliability.

An effective way to understand the operating principle of the QEG is to think of it as a self‐excited toroidal transformer with high‐voltage primary, and low voltage secondary. The primary high voltage is self‐generated through mechanically pumped parametric resonance. The resonance occurs as a function of the spinning rotor modulating the reluctance/inductance in the primary tank circuit windings. This modulation initiates an oscillation which can develop up to 20,000 volts (20kV) or more in amplitude, with frequency determined by the tank capacitor value and inductance value in the primary windings.

Power is then transferred to the secondary windings during the intervals where the rotor is between pole pieces (unaligned). In today’s alternative energy terminology, it would be called a type of resonance machine.

MINI QEG TECHNICAL DESCRIPTION

The  mini QEG prototype is called the “TeslaGen”. It is a high voltage, six-pole, resonant generator, that is easy to repair and modify, and is capable of powering loads between 700w-900w (conservative). Driven by a DC motor, this efficient, portable generator can provide electricity offgrid, or during outages and natural disasters. With further development, this generator has the potential to power itself. The construction is a simple, yet rugged combination of high strength plastic frame and support rods, and is made using widely available parts and fittings. All parts of this reluctance generator is CNC manufactured, and the Computer Aided Design files for these parts will be made available online through this project.  This Tesla-inspired technology is scalable and can be reconfigured to suit the power application of the developer. You will be able to swap rotors and coil windings.

ABOUT THIS CAMPAIGN

This is a campaign to complete the project of developing a prototype so that plans for building can be open sourced. This is not a store to buy or sell manufactured QEG’s.  This is an “All or Nothing” campaign. Backers for this project will pledge a certain amount by filling out a simple form. No credit card details will be collected at this time.  Once there are enough pledgers to fully fund the campaign, a notice will be sent out to all backers with a Paypal Invoice for them to pay with a credit card in the amount that they pledged.  No one will be charged or invoiced for a pledge unless the campaign reaches its funding goal. This way, we can ensure that we have the budget we need to successfully implement the project.

Rewards or perks are our chance to share a piece of this project with our backers. We have created several different reward levels below.

Pledge Amounts from $0-$99 does not include a reward.

$100 Pledge
Get a copy of the mini-QEG build manual (when it is complete)
Get a copy of the updated QEG build manual with new circuit design (when it is complete)
Get a download copy of the mini-QEG CAD files

Estimated Perk Delivery Date:  May 1 2018

$300 Pledge
Get everything included in the $100 Pledge PLUS
One Year Gold Membership to the Clean Energy Academy includes access to all archives, forums and live calls.

Estimated Perk Delivery Date:  May 1 2018
Access to Academy membership is immediate

$1,000 Pledge
Get everything included in the $300 Pledge PLUS
A Beginners Build Class Digital Download Package for the large QEG
(Over 15 hours of instructional video, eBook, QEG CAD package, Bonus Materials)

Estimated Perk Delivery Date:  May 1 2018
Access to Academy membership is immediate