What is the QEG?

The Quantum Energy Generator (QEG) is an opensourced, fuel-less generator prototype based on a public domain patented invention of Nikola Tesla. The type of energy that is utilized by the QEG design is different than that of a conventional generator. Once co-development is complete, the generator is designed to be highly efficient and power your home.The QEG was opensourced in March of 2014 and has been in co-development with many teams around the world since this time.

QEG System Description

The Quantum Electric Generator system (QEG) is an adaptation of one of Nikola Tesla’s many patented electrical generator / dynamo / alternator designs. The particular patent referenced is No. 390,414, titled “Dynamo-Electric Machine”, and dated October 2, 1888.

The QEG prototype is scaled to produce electrical power in the range of 10-15 kW (kilowatts) continuously, and can be wired to provide either 120 Volt or 230-240 Volt single phase output. We are also planning future designs to provide 3-phase power.

Service life of the device is limited only by certain replaceable components, such as bearings, v-belts, and capacitors. The basic machine should operate trouble-free (with minimal maintenance) for as long as any good quality electro-mechanical appliance, such as a quality washing machine or refrigerator. Heavy-duty mechanical components are used throughout for reliability. The QEG is not a complicated device, as it is designed (like Tesla’s other ‘discoveries’), to work in harmony with natural laws, rather than with the power-wasting symmetric motor and generator designs used in today’s mainstream industry.

An effective way to understand the operating principal of the QEG is to think of it as a high-powered self-resonant oscillator (what they used to call a ‘multivibrator’), adapted to transform high-voltage pulses (15 to 25kV) into line voltage AC output, at current levels up to 120A. In today’s alternative energy terminology, it would be a type of resonance machine.

The circuitry that develops high power in this device is really based on an existing but under-utilized power oscillator configuration, however, the ‘quantum’ part of the design has to do with how the generator is started. Conventional alternators (AC generators) usually have a device called an ‘exciter coil’. This coil is usually a smaller, separate rotor winding that provides an AC voltage that is rectified and used to power the generator’s field coil(s).

In the QEG, there is no internal, common exciter coil, and no rotor windings. In addition, to look at the circuit diagram, it is not apparent where the input power comes from to start resonance, and this is key; the QEG exciter coil is external to the generator, and the excitation signal is conducted through the quantum field (zero point) into the generator core, to start oscillation. Once the machine builds up to the resonant frequency, it powers itself (self running).
-James M. Robitaille

About the Free Energy Academy

Due to strict government regulations pertaining to (free) energy devices, as well as special corporate interested responsible for suppressing “disruptive” technology, The Free Energy Academy is the perfect place for information sharing. Now you can join a community of like-minded engineers who are serious about their research, and who are actively building free energy devices. You can participate in forums from DIY flywheels to radiant energy technology and much more.

Here is what you get:

When you sign up for the Free Energy Academy Gold Membership, you will be given access to download the Free QEG Opensource Manual, the Tesla Patents Report, Quantum Energy Articles, and our condensed version of our eBook Forbidden Tech. You will also be able to order a set of two free orgone pendants (a $50 value!) absolutely free, we’ll even pay for shipping and start making your handmade orgone pendants right away. Gold Membership is only $25 month for unlimited access and you can cancel at any time, no questions asked. You can spend time exploring the many features our Academy has to offer, the build manual, Tesla Report, Quantum Energy Articles, Forbidden Tech condensed ebook and orgone pendants are yours to keep.

CLICK HERE TO GET YOUR QEG PLANS AND JOIN THE FREE ENERGY ACADEMY
BE SURE TO SCROLL TO THE BOTTOM OF THE PAGE ON THIS LINK FOR CHECKOUT

108 Comments

Rod on March 26, 2014 at 12:16 pm

Great, cant wait to get stuck into it. Has anyone converted the manual into millimetres yet?
Thanks
Rod
Ellen on March 26, 2014 at 4:47 pm

TESLA lives on….
Thank you THank you Thank you!!
ohnwentsya on March 26, 2014 at 7:28 pm

Reblogged this on Spirit In Action and commented:
Thank you! This is so amazing and beautiful. Everyone please share this-it will stop so much that is wrong by taking away the energy corporations power to control people and governments.
Jordan on March 26, 2014 at 11:21 pm

what is the average cost of all the parts to make this.
Is there a video showing on that is made and working:)
Looks awesome
Xephyr on March 27, 2014 at 12:27 am

Thank you, thank you, thank you, thank you…..I could go on 😉
ohnwentsya on March 27, 2014 at 4:01 am

An engineer on Facebook scolded me for sharing this saying it is just plans for a Tesla steam generator and the rest is random technical stuff strung together? He sent me a link to a wiki page on how perpetual motion has been proven impossible.

I’ve been following your project since the initial questionnaire and am really confused now.

I posted everywhere about this being released because I believe strongly that breaking energy corporations stranglehold on our governments and environmental health is key to long term species survival.

I’m not posting this to heckle because I support you, but if his assessment is not factual then having a prepared answer to it that shows that would be very helpful so people don’t become discouraged.
andrew on March 27, 2014 at 12:46 pm

You are all incredible! Keep up the awesome work!
Alikas on March 27, 2014 at 4:19 pm

From that material rotor?
Ashley Kimler on March 27, 2014 at 5:08 pm

Reblogged this on insightmama and commented:
Wow… I hoped my first post would be something I wrote myself, but this is too good not to share! Let’s keep it going!
unityoness2013 on March 27, 2014 at 5:31 pm

Reblogged this on unity2013 and commented:
Look at this, also look at the documents that Keshe has.
http://www.keshefoundation.org/
Mr Botha on March 27, 2014 at 5:58 pm

Could I please follow you in London to see how this is built?
Regards, Heston
Mr Botha on March 27, 2014 at 6:05 pm

If possible, would you allow me to meet with you when you in London? If indeed, could you please indicate when you will be in London, the dates please. Would need to still apply for a visa.
Guillaume on March 27, 2014 at 9:04 pm

I am a Mechanical Engineer living in Alberta, Canada. I am planning on building a QEG from the instructions provided. My plan is to build a prototype and prove the company I am working for that this works. From there, I would partner up with them and start building units for sales. If there is a possibility to “buy” (would you entertain some rental agreement for some % of profit or something along those lines?) a unit from you guys so I can prove this faster and get the fabrication going ASAP. I believe in this and I want to be part of the distribution of this awesome technology to the people. Please get in contact with me if we could line up a demonstration or something like that.

Can you point me to any support that would be available on the technical side or forum with other people building this as well.
Amos on March 27, 2014 at 10:52 pm

Hi,

Thanks a lot for the open-source document. Have you shown the QEG to the Australian businessmen yet? I remember you mentioned they’d be willing to send a team to check out the device once it’s made, and if satisfied, they’d help you do all that’s needed to get the QEG everywhere it needs to be.
createmusic on March 28, 2014 at 2:35 am

Reblogged this on Higher Density Blog.
Jann on March 28, 2014 at 7:24 am

HopeGirl…what type of skill sets are required to build such a machine? For example, could an auto mechanic be able to build one?
hopegirl2012 on March 28, 2014 at 7:43 am

Not yet, what we would do it soon!
kawehikanui11 on March 28, 2014 at 2:51 pm

God Bless Nikola Tesla…we love you tutu…
Chris Dibor on March 28, 2014 at 4:02 pm

I refer the the Cottage Industry Community Units
Susan Wu on March 28, 2014 at 9:00 pm

I’d also like to know the average costs (in USD) to acquire all the parts to build the QEG. Are we walking 3 or 4 digits?

I’d like to build one, then pitch it to the CEO of my company to mass produce this. Company does tons of philanthropic / green energy projects.
lance singer on March 28, 2014 at 10:44 pm

Cool
TeslasGhost on March 29, 2014 at 7:59 am

This closed loop genset concept has kept me occupied in thought for much time, reviewing the variants of related design, going over tons of youtubes, its great to see such activity propelling it towards global unity, and you lady are the behind the wheel taking us to DisneyWorld.
As if seeing the clouds of darkness disolving to reveal the sun.

What is about to happen is revisions upon current design spec according to discoveries other builders have encountered during construction. Options to use
certain other materials or arrangments of the materials, as if to make it more affordable, durable, acessable.
Clearly detailed open sourced plans with walk through explainations throughout all steps of the building process, possibly described from 10 different instructors points of view, really allowing people to absorb it all coherently.

Brilliant well laid out plans you released.

Thankyou for all you do. Your drive is inspiring to everyone. All the best to us all.

Goodbye greedy world, hello new brave one!
wolfke74 on March 29, 2014 at 5:09 pm

Reblogged this on Awakening to Arachanaï.
Neil Foss on March 29, 2014 at 8:05 pm

Hi Mr Botha
You may be interested to know Hopegirl is in London on April 11th attending a conference.
Alchemyevent.com
You can also post on my forum
http://Www.theqeg.freeforums.org
Neil Foss on March 29, 2014 at 8:07 pm

Hi Gillaume
Pre built QEGs will not be available for a while.
I have set up a forum here
http://Www.theqeg.freeforums.org
Neil Foss on March 29, 2014 at 8:09 pm

Hi Amos
The business plan changed/evolved into the creation of CICUs instead of one maker/investor.
Neil Foss on March 29, 2014 at 8:10 pm

Hi Jann
I don’t think an auto mechanic could build it alone. Detailed electrical engineering knowledge is required. If you find one you could probably build it together.
Neil Foss on March 29, 2014 at 8:12 pm

Hi Susan
The first QEG was built using approx $7500 which was raised through crowdfunding.
Shell on March 30, 2014 at 2:53 am

Where can I order one in Australia, or pool resources for larger versions for community use?
bob on March 30, 2014 at 4:02 am

Hi Guillaume I live in BC. Please contact me and we can arrange to build on tougher.
Cheers
Bob
Chris Dibor on March 30, 2014 at 9:29 am

Hi Neil, where can I see a working QEG Pplease?
peterbierhofPeter on March 30, 2014 at 9:39 am

hello, I have been looking for free energy devices some time now and I know about Tesla. This is great stuff! But could you bring me in contact with somebody who actually build one of these? I would love to speak with him/her about their experiences and tips to build my own. kind regards, Peter ( Netherlands)
wodenorspirithawk on March 30, 2014 at 12:17 pm

Reblogged this on Wodenor-Spirithawk.
Martin on March 30, 2014 at 6:19 pm

Hi Rod,
I have the design almost completed in mm on Solidworks. I could offer parts and assembly data to continue. Since I’m not sure what motor I should use and where to by I couldn’t finish designs on all parts.

Regards,
Martin
willsummer on March 30, 2014 at 10:31 pm

Reblogged this on Will Summer – Sum Liber.
theactiveskeptic on March 31, 2014 at 1:20 am

Reblogged this on The Active Skeptic and commented:
Open source plans for an over unity generator that will provide enough energy to power a household.
Build one!
Jozef Ďurica on March 31, 2014 at 12:11 pm

Hello, I want to build one. Do you have CAD drawings for the mechanical part? If not, we have to draw it first. It is required by the companies which produce parts to order. I have a friend which can do it, but I ask first. Thanks.
Guillaume on March 31, 2014 at 2:09 pm

Give me your contact information. I will contact you… or e-mail me at guiallen@hotmail.com.

Cheers!
BlueZulu on March 31, 2014 at 2:23 pm

Hi, for me that would also be useful to get CAD drawings. Also hoping that people either join an existing forum created by Neil Foss here http://Www.theqeg.freeforums.org to contribute or HopeGirl make time to start an official forum or at least join the one above to kick start a forum community to help better organise the information for all.
Victoria 2070 a.d. on March 31, 2014 at 3:15 pm

Reblogged this on Victoria 2070 a.d..
Neil William Shaw on March 31, 2014 at 6:02 pm

Neil Foss, long shot of the year but this isn’t the Neil Foss I know is it?
Lance on March 31, 2014 at 7:29 pm

How can I not support this kind of thing?

Thank you so much! If this success in the public, it will change the world, forever!
Devan Helberg on April 1, 2014 at 3:15 am

I FOUND ONE….https://www.youtube.com/watch?v=-Ztt3R4Bu_0
BlueZulu on April 1, 2014 at 9:22 am

Okay, this QEG design based on the working demo that was built by WITTS Ministries. They don’t seem to be happening much or changed the way to do things on the internet. I’m also not very keen in reading to much about their ministries etc. but they posted a YouTube video on Jan 20, 2012 showing this working. https://www.youtube.com/watch?v=-Ztt3R4Bu_0

With FTW and their approach of setting up CICU’s around the world this QEG will happen because it’s not tied to any religious movement but rather humanitarian / save the world movement.
Marianne van Heerden on April 1, 2014 at 4:58 pm

Hi Blue Zulu, are you in South Africa? If so would like to contact with others close by to learn where to get components
BlueZulu on April 1, 2014 at 10:56 pm

Hi Marianne, yes I’m in Cape Town 🙂
Don’t mind connecting with others in SA or anywhere but don’t like publishing my contact details on public commenting blogs due to trolls and spammy people lurking on blogs.

That is another reason why I support the idea of moving more detailed discussions into a forum environment where members can exchanges and organise ideas but also share private messages.

From above suggestions in comments Neil Foss went ahead and created a QEG forum here http://www.theqeg.freeforums.org

It’s still very new but I joined because people are able to post conversations in a more structured way etc. You welcome to signup and find me as username: zebroid

For QEG you might be ahead of me in sourcing material because from my side I’m still talking to people around me and here to either get more local partners or find the right technical experience to help me assemble.

I’m a designer/developer by trade and grew up fixing cars, building houses, designing etc. but not a qualified mechanical/electrical engineer, so essentially I’m looking for someone to help me build these without electrocuting myself to much.

Sourcing components and financing in SA I don’t think would be such a major mission here but still early days.
m on April 5, 2014 at 12:03 am

SolidWorks and a few hours you have the “drawings”
lightenup on April 5, 2014 at 7:08 pm

Reblogged this on lightenupmyworld and commented:
Let the en-light-ening begin!! Turn on the lights using the open sourced free energy generator and see what an awesome world we can make together. The link for the open sourced QEG plans is given to the world in this post.
viplatin on April 6, 2014 at 2:30 pm

Dear all. Open Source is the only way we are going to bring equality to the people.

Now, when I see resonance in the latest youtube title (Copy of QEG Taiwan Has Resonance!!!), I can only think of one thing:

The RealNumberPi (https://www.facebook.com/TheRealNumberPi)

Pi is NOT 3.1416… Pi IS 3.144605511…

Which can be used to calculate the right operational frequency, L & C:

Resonance effect (from http://en.wikipedia.org/wiki/LC_circuit)

The resonance effect occurs when inductive and capacitive reactances are equal in magnitude. The frequency at which this equality holds for the particular circuit is called the resonant frequency. The resonant frequency of the LC circuit is

omega_0 = {1 over sqrt{LC}}

where L is the inductance in henries, and C is the capacitance in farads.

The angular frequency omega_0, has units of radians per second.

The equivalent frequency in units of hertz is

f_0 = { omega_0 over 2 pi } = {1 over {2 pi sqrt{LC}}}.

If you use Pi = 3.144605511… you can calculate accurately the rest.

Note: I am not the only one who worked out this, there are other human beings who have done so also.

Give it a try, calculate it for yourself.

Very good job with this. I support you 100% and will build myself one of these when money permits.

Thank you, sincerely,

A fellow self-sovereign human being on planet Earth.
Carlos E. W-B Hernandez
https://www.facebook.com/TheRealNumberPi
loveinlaw on April 8, 2014 at 10:01 pm

Reblogged this on Loveinlaw's Blog and commented:
As Promised, here are the open sourced documents for a quantum energy generator. This has been made possible by the people and for the people. It is freely given to the world.

CLICK HERE FOR QEG OPEN SOURCE DOCUMENTS

An average modern household requires 5-10KW of power to operate.

A conventional generator needs 15KW to produce 10KW of power.

To produce these 15KW of power we rely on gas, diesel, propane, coal or other products that can be metered creating profits for the oil industry.

130 years ago Nikola Tesla invented and patented an energy generator. This is a resonance machine that only needs 1KW of input power to produce 10KW of output power. His patents are now in the public domain.

The Fix the World Organization has reproduced Teslas design with a few modern twists to generate the same results. Our Quantum Energy Generator (QEG) provides 10KW of power output for less than 1KW input, which it supplies to itself.

We have freely given this technology to the people of the world. We’ve open sourced a full set of instructions, user manual, schematics and parts list for any engineer to follow and reproduce the same results.

How the QEG works:
First we use a starting power source, such as an outlet or a crank to power the 1 horsepower motor. This motor spins the rotor in the generator core. The unique oscillator circuitry configuration in the generator core causes resonance to occur. Once the core achieves this resonance it can produce up to 10KW of power, which can then be run through an inverter to power the motor that spins the rotor. You can then unplug the motor from the original power source and the generator will power itself.

Cottage Industry Community Units specifically for the production of QEG’s are NOW developing in communities in 30+ countries. The People are making their own free energy devices.

The QEG belongs to humanity now. Many will make further improvements and we will all co-develop this practical bridge technology together.

The QEG: For the People and By the People
Score Fuxxon on April 9, 2014 at 5:36 am

So If I measure the circumference of a metal ring with a mikrometer and divide the result with its radius, I’ll get Your version of Pi?
viplatin on April 9, 2014 at 12:56 pm

Pi by definition is the result of the Circumference C divided by the Diameter D.

So, yes, if you take a mikrometer, and then do: C / D, then you will get 3.144605511……. to the latest decimal…
francisco pastor martines on April 9, 2014 at 4:35 pm

Fabuloso, fantastico por la gracia de Dios.
bill40 on April 10, 2014 at 10:49 am

can anyone tell me the approximate cost of building one of these machines? The skills required are way beyond anything I can do.
infocouch on April 15, 2014 at 7:20 am

Reblogged this on infocouch.
Blog Anti NOM on April 16, 2014 at 9:17 am

Reposted it here in portuguese:
http://www.anovaordemmundial.com/2014/04/gerador-quantico-de-energia-eletrica-manual-para-criar-gerador-de-energia-livre.html

Congrats for this great work!
WellnessHero on April 22, 2014 at 2:22 pm

Reblogged this on Wellness Hero and commented:
I got the papers, can’t wait to channel them to the engineers!!
Thilo Volz on April 27, 2014 at 1:06 am

I tead your very intersting Website for free energy and if possible pls send more information about free energy – because many friends are also interested in this kind of energy to free ourselves from the German energy companies.
Thank you very much in advance !

Greetings
Thilo
Jozze Oliver on April 30, 2014 at 7:25 pm

Hello I really would like to Thanks you for this amazing shared notification !! I would like to give all my support to help spread this great opportunity for the world !! Thanks you all !!
sciosubspace on May 1, 2014 at 12:31 am

At the end of this view there is a proposal from RS that is defenetely interesting to all of us.
http://youtu.be/M8fhOqCmem0
Steve on May 1, 2014 at 11:17 am

I’m going to have to make a trip to the college to see if we can’t get one of these built ASAP. Thank you so much!
The Conscious Corporation on May 1, 2014 at 11:29 am

Reblogged this on The Conscious Corporation and commented:
Excellent. Good to see that this is put back into mainstream media. Share the knowledge, it’s about time…..
Jessie Beveridge on May 1, 2014 at 5:54 pm

Are the Scaled-Up plans available here? If not where would I find them?
Chris Carrigan on May 2, 2014 at 11:57 am

This is so wonderful I could simply weep with joy. When one imagines the possibilities and how great it is that our communication network is being used to share things like this it’s very liberating. I only hope this takes off like it should and changes the world in a very positive and actual way. I plan on trying to get more of these devices produced and supplying valid power for valid people. Thank you, thank you, thank you for not sweeping this under the rug or not disclosing it to the public. The ideal of freedom this device reflects (to me) is the true spirit of ingenuity and man’s triumph over the monopoly created by powers greater than isolated individuals. Keep it up the good work and lets get this ball rolling. Kudos good people! Great stuff!
Sheriff on May 2, 2014 at 12:10 pm

Thanks for sharing this with the world
There is a Jedi knight in all of us… Hope people such as you you awaken all of them
Natalie on May 2, 2014 at 12:40 pm

Thanks sciosubspace! I enjoyed the video! Will share it!
Yee Chut Ngeow on May 2, 2014 at 7:09 pm

I heartily congratulates your achievements. I think I have a plausible explanation on where the source of energy lies. Take a look at the short video below. I believe that it depicts an accurate picture of what is happening at the quantum level:

– Vacuum itself is a field of wave, and energy.
– The vibrational field is the substrate upon which matters arise (like the water droplets separating out of the water body and started to bounce and move around the water surface, all the while powered by the energy field.

If this picture is correct, there is an enormous sea of energy, vibrating at some specific frequencies, sitting there to be harvested. I do believe that the QEG motor is possible in principle. I would be keenly following the development of the communities surrounding it.
Yee Chut Ngeow on May 2, 2014 at 7:19 pm

I got interested in QEG because I am in touch with another technology that I think is working with the same fundamental principle – the wave energy in quantum vacuum. This technology is able to change the composition of matters via modulating the quantum waves. It was able to clean up highly polluted rivers, from class V (highly polluted) to Class 2 (suitable for water sports).

I have some materials about the technology that I don’t have permission to make public. Please send me a message on Facebook if you want to find out more.
Rick Shannep on May 3, 2014 at 3:38 am

What is the approximate cost (for parts) and how many manhours to build (for a professional electromechanical engineer first time)?
weisstar on May 3, 2014 at 11:47 am

Reblogged this on Noua Era.
Citizen Pariah on May 3, 2014 at 12:52 pm

I’ve long been a fan of Sheldrake, I recommend reading at least one of his many great books. There is even a consumer or layman version of his morphic resonance theories in Dogs That Know Their Owners Are Coming Home. Not just woo-woo but a respected view of the fundamental nature of reality.
Citizen Pariah on May 3, 2014 at 12:54 pm

Reblogged this on Citizen Pariah and commented:
While I am still searching for the plans and some corroborating comments or evidence from independent researchers, I feel it’s important to keep current (pun intended) with developing alt energy. All it takes is for one to be real
Citizen Pariah on May 3, 2014 at 12:56 pm

I reblogged this as well. All it takes is for one device to be genuine so it’s worth following up on all current works.
Lance Singer on May 3, 2014 at 3:46 pm

Thank this beautiful 🙂
Peter Begetis on May 6, 2014 at 1:06 pm

We live as slaves in our beautiful abused world its this sort of technology that needs attention and development. Ill be part of that. Thankyou. Time to change my life.
Barton Routt on May 6, 2014 at 5:16 pm

I liven in austin texas. How can I be a part of this. Tell me and I will commit.
Steele Braden on May 6, 2014 at 9:53 pm

Has anyone replicated this??
If so, input and output wattages are essential details to post.
Construction plans are great.
We just need some verification that it actually WORKS !!
Loz Dawney on May 6, 2014 at 10:36 pm

Hey guys another very interesting machine is the Yildiz all-magnet motor. Check it out from what I see it is ready for use and fully working. Worth a look!!! 🙂
Jozze Oliver on May 7, 2014 at 12:17 am

Hello dear !! I really would like to know if it’s possible to have one building here in Brazil !!?? Please come to Brazil too !! If you need some help just contact me ok !!?? I will be so glad to receive your time here in Brazil !! This is my mail address for you : ainochikara2011@hotmail.com Best regards to all of you !! You’re doing a great job !!
Anze on May 9, 2014 at 7:15 am

All good and dandy, lets assume this thing really works. But how much investment is required? Going through the list of components, the ones that I heard of yet, sum of at least 700€, and thats not even half of them. Plus labor you have to put into it..

Anybody has any more insight on prices of this components?
Steele Braden on May 9, 2014 at 11:13 pm

Hi Glen and Andy, I am a retired electronics engineer living in Auckland.
Keen to get a QEG under way.
Like to compare notes or do something together.
drop me a line stebra@xtra.co.nz
Phone 09 5756406

Steele Braden.
Steele Braden on May 11, 2014 at 12:28 am

Does anyone live in New Zealand, preferably Auckland?
I am, a retired electronics engineer.
Would like to compare notes on the QEG and look at possibly putting the system together.
stebra@xtra.co.nz
Phone 5756406
Steele Braden.
Dustin on May 16, 2014 at 11:24 am

You guys are awesome thankyou for this valuable contribution to society
Arunas on May 17, 2014 at 2:29 pm

Hello,

the QEG is a good start just it is only top of the iceberg.

If you check for Tesla motor patent US555190 there is generator in first drawing left which is even more sophisticated and finished than QEG. Unfortunatelly I could not find a patent for that generator but it it is definatelly follow up of Tesla patent US511916. The generator design shown in Tesla patent US555190 already involved motor-generator in single toroidal unit and mixing voltage with currrent on same ring which shoud nulify Lorentz opposing magnetic force reaction to rotor. So have good luck reaching to that point!

Cheers!
Juan on May 22, 2014 at 4:26 am

Hello, I live in Houston, ans I will try to make a group of fellow engineers to builld one here. Are you interested? write to juancastellanospr@hotmail.com
ryan on May 23, 2014 at 3:45 am

Is it possible to extend the mainshaft out and runthe motor of that making it have lesser parts to replace e.g the belt
Roman on May 23, 2014 at 4:13 pm

Yes sir, I live in Tauranga! What an exiting possibility! If we could create one, we would see come into fruition a VERY harmonious life for not just us but the rest of the generations to come on planet earth. it would change EVERYTHING! If we used it in the right way of course! I am going to read the user manual and see if i can understand how it works and if its possible. Then I will report to you. If you want to make this thing, and if I understand its general idea, I will help in any way I can. And not just me, I am sure the world would give its soul to the completion of the project. With a solid case, the idea WILL be funded! Surely!! God speed sir! If you understand its general idea, I would love for you to share it with me! Regards

Roman
Steele Braden on May 23, 2014 at 10:35 pm

Hi Roman,
looking forward to some dialogue with you on the QEG.
Best regards,
Steele.
stebra@xtra.co.nz
Ken McMurtrie on June 12, 2014 at 7:43 am

Reblogged this on The GOLDEN RULE and commented:
Not yet convinced but plenty to think about.
reblogging simply to keep access alive.
Readers may wish to comment.
Sulman Munir on June 15, 2014 at 7:31 pm

Research and production. Is under way. Already. I
andrew fence on July 7, 2014 at 5:41 am

You can should!! build the QEG using Teslas original stand up coil system, with the big Torus and ball, and copper tower.!! All u need to do to get it running is reverse the process by eliminating the 120-240DC power source and replace it with a A/C to D/C converter, and ground a positive AND negative lead to ground,like an aquifer,cause to work it needs water as the ground.(uses waters electrons and protons and salt to function,lubricate if u will)Don’t forget the row of 8storing capacitors before the spark gap, it should be tunable/adjustable as ALL spark gaps in his design are, even though he hid it from design because he knew ahead of time they were gonna steal his ideas and then murder him. Then, wen u need power just plug it in to a source(that draws power) and watch the power come jumping out of the Eather!!!!!! LONG LIVE Tesla!!!!!!!!
Rakesh Ralli on July 20, 2014 at 3:42 pm

Andrew , congrats – you broke the hidden code.

I am at New Delhi , India and want to replicate the same.

Can you assist me getting started, by sharing your experience, since I am not an Electro mechanical expert.

Has any one from New Delhi / India succeed in replicating the same ?

regards

Rakesh Ralli
ralli2mail@gmail.com
Rakesh Ralli on July 20, 2014 at 3:47 pm

from where it is available ?
appliance deals on September 23, 2014 at 12:41 am

Thanks for sharing such a pleasant idea, post
is pleasant, thats why i have read it fully
2014oliver on September 30, 2014 at 9:29 pm

Hi out there: is anyone in the UK teaming up to build one? v.interested to help!
wolfchild on October 1, 2014 at 8:53 pm

good job 🙂
Anita on November 27, 2014 at 2:12 pm

Hello! I would like to ask if thedocuments could be reached in Hungarian language? It would be a great pleasure to receive a Hungarian version 🙂 Thank you very much in advance.
John Dinu on December 28, 2014 at 10:27 pm

Andrew in witch country are you? did you built one? Just wondering if I can ring you and speak in person. Thanks
John/Australia
gertjan on January 17, 2015 at 8:02 pm

great job !!!! is there( some one) something where I can ( join ,meet ) to build in the netherlands
hopegirl2012 on April 29, 2015 at 6:34 pm

You are welcome Peter.
hopegirl2012 on April 29, 2015 at 6:43 pm

You can get the plans here: http://www.fixtheworldproject.net/qeg-open-source-documents.html and here http://be-do.com/index.php/en/

http://be-do.com/index.php/en/forum/manuals-documents-and-tutorials/32-wanted-translation-of-qed-manuel-in-dutch

Thank you.
Emerson Salvador on April 30, 2015 at 7:35 pm

Hi, my dream was help humanity to find way to have free energy… so Congratulations from Brazil.
hopegirl2012 on May 1, 2015 at 1:21 pm

Dear Emerson:

Thank you. You may join the Spanish QEG team here: http://www.qeg.es/ and you may also listen to Spanish call here: https://hopegirl2012.wordpress.com/2015/04/25/qeg-spanish-introduction-call/ Bring your dreams to reality.
Marc on May 30, 2015 at 7:04 am

The patent US555190 can be found on: http://pdfpiw.uspto.gov/.piw?PageNum=0&docid=00555190&IDKey=04AC9FC9CAE1&HomeUrl=http%3A%2F%2Fpatft.uspto.gov%2Fnetahtml%2FPTO%2Fpatimg.htm
Patent US511916 can be found on:
http://pdfpiw.uspto.gov/.piw?PageNum=0&docid=00511916&IDKey=32924AFD23D5&HomeUrl=http%3A%2F%2Fpatft.uspto.gov%2Fnetahtml%2FPTO%2Fpatimg.htm
in general patents in US before 1975 can be found here on patentnumber:
http://www.uspto.gov/patents-application-process/search-patents
mmiller on July 17, 2015 at 6:27 am

10 watts outputted to 1 watt input
Lance Singer on August 22, 2015 at 5:52 am

That’s awesome 🙂
John Witt on November 10, 2015 at 7:19 am

I have one that i made 6 years ago.
Simeon Dias on April 10, 2016 at 3:56 pm

Hey John have you started building this yet. I would like to know some details. I have been looking at similar devices for a few years now and not sure which one will actually work.

Get in touch with me if you can.

Thanks
Simeon / Perth, Australia.